Since the repo updates are happening in an IntentService, they are already
running in a separate thread. Ironically, the dialog was showing in spite
of that. This removes the dialog entirely and instead puts up a
Notification with the same messages. Ultimately, the "refresh" button
should go away, the repos should be updated whenever someone goes to
install an app, and all APK downloads should also show up in the same
Notification.
This removes UpdateReceiver entirely and replaces it with local broadcasts,
since that is a common pattern in FDroid and Android. It also reduces the
amount of code here.
refs #103https://gitlab.com/fdroid/fdroidclient/issues/103
Apply the accent color to alert dialog buttons. Note that without
"android:windowMinWidthMajor" and "android:windowMinWidthMinor" attributes
dialog width is calculated incorrectly resulting in visual artifacts.
Thanks to @mvdan for catching that. Turns out Java's String formatting is
not as tolerant as C's printf(). Java crashes when the format is wrong,
while C just ignores extras.
Might as well tap into the stream to get the byte counts, that's best
progress info I can think of when parsing a file.
This is a step towards a single progress bar for the whole process, instead
of showing one progress for downloading, another for parsing XML, then a
third for processing the new app info.
Fixes#240.
To make this easier, I added a script to aid in downloading icons.
Checkout F-Droid/tools/download-material-icon.sh for more details.
The icons are licensed under the CCv4 attribution license, which I
added a shout out to under "License" in the README.md.
- use 'com.android.support:appcompat-v7:22.0.0' instead of version 20.0.0
- ActionBar color: "F-Droid Blue" (also option for "F-Droid Green")
- fix invisible swap button with Material Design
- remove "Light + dark action bar" theme (as of Action Bar is always blue/green)
Fix#263 "cannot manually add repo that was swapped before"
Pretends that the swap repo never existed, by deleting it before adding
the new repo, and showing the same message that is shown when a new
repo is added. This does not change behaviour for existing non-swap
repos. They are not deleted before being added again, or else we would
lose the ability to verify the fingerprint of an existing repo is the
same as a newly added one with the same URL.
Note that this has the effect that the fingerprint/pubkey of the swap
repo is nuked when adding that repo manually.
Internationalised the string "BAD FINGERPRINT" while I was at it.
To test it out, here is some instructions to make life easier:
Firstly, go into manage repos and delete the guardian project main repo (going to pretend to use this for swapping to make life easier).
Then if you run `sqlite3 /data/data/org.fdroid.fdroid/databases/fdroid` and execute the query:
`select substr(fingerprint, 0, 10), substr(pubkey, 70, 10), address, isSwap from fdroid_repo order by fingerprint desc;`
You should see:
```
B7C2EEFD8|081ad310b3|https://guardianproject.info/fdroid/archive|0
43238D512|071310b300|https://f-droid.org/archive|0
43238D512|071310b300|https://f-droid.org/repo/|0
```
Now simulate a swap session like so:
```
adb shell am start -a android.intent.action.VIEW -d 'https://guardianproject.info/fdroid/repo?swap=1'
```
Which results in the following database:
```
B7C2EEFD8|081ad310b3|https://guardianproject.info/fdroid/archive|0
B7C2EEFD8|081ad310b3|https://guardianproject.info/fdroid/repo|1
43238D512|071310b300|https://f-droid.org/archive|0
43238D512|071310b300|https://f-droid.org/repo/|0
```
Note the last column (`isSwap`) is `1` for the newly added swap repo. Now we will add the repo (without a fingerprint) to the Manage Repo activity. If you are feeling lazy, execute:
```
adb shell am start -a android.intent.action.VIEW -d https://guardianproject.info/fdroid/repo
```
The repo will be removed, then re-added as a TOFU repo:
```
B7C2EEFD8|081ad310b3|https://guardianproject.info/fdroid/archive|0
43238D512|071310b300|https://f-droid.org/archive|0
43238D512|071310b300|https://f-droid.org/repo/|0
||https://guardianproject.info/fdroid/repo/|0
```
I noticed some bugginess with sending the same intent and it being ignored, I'll have to look at this another day (not caused by this change, it already existed in master).
See merge request !90
- App icon is now 72dp x 72dp
- Description is expandable
- License, categories, Website, Source Code, Issues and Donate (#232) are moved from header to summary
- Buttons to install, update and run are moved from action bar to header
- Permissions are expandable and always shown
- Add myself to copyright holders of "F-Droid/res/layout/app_details_header.xml", "F-Droid/res/layout/app_details_summary.xml" and
"F-Droid/src/org/fdroid/fdroid/AppDetails.java"
Without them, some features like proper density icons only worked after the
first update, but not on the first index update itself since the version
defaulted to 0.
Pretends that the swap repo never existed, by deleting it before adding
the new repo, and showing the same message that is shown when a new
repo is added. This does not change behaviour for existing non-swap
repos. They are not deleted before being added again, or else we would
lose the ability to verify the fingerprint of an existing repo is the
same as a newly added one with the same URL.
Note that this has the effect that the fingerprint/pubkey of the swap
repo is nuked when adding that repo manually.
Internationalised the string "BAD FINGERPRINT" while I was at it.
improved, but still rudimentary, hotspot handling in swap
My previous merge request fdroid/fdroidclient!78 was based on one broken assumption: `WIFI_STATE_UNKNOWN` means that the hotspot is active. Apparently, that's not always the case. Also, sometimes when the hotspot is active, its `WIFI_STATE_DISABLED`. Even worse, there is no broadcast message sent on final config of the hotspot. There is only a `WIFI_STATE_DISABLING` from turning off the wifi, but then never a broadcast for `WIFI_STATE_UNKNOWN` and/or `WIFI_STATE_DISABLED`. But I found some tricks that seem to work for now. We'll need to use your library, @mvdan, to really get good support of hotspots.
This also includes some basic UI tweaks to represent the hotspot mode in the swap wifi screen.
See merge request !79
Removes trailing slashes from URLs, replaces multiple consecutive forward
slashes in the path with a single slash. Canonicalizes the URL.
If the URL is invalid, display a message to the user and don't let it get
added.
NOTE: This does *not* normalize existing URLs in the database.
Previously it would only compare the details of a new repo to existing
ones if the new repo came via an intent. Now it does it whenever you
change the text in the new repo dialog (shouldn't be too much of a
performance hit, it isn't doing very much).
The things it (still) doesn't do is:
* verify that the url looks like a url
* sanitize the newly input uri and compare it to sanitized saved repos
The second point means that you can end up with:
http://10.0.1.50/ and
http://10.0.1.50
both in the list. I'm going to log an issue for this, because it should
be fixed, but doesn't need to hold this up.
This is really just a placeholder, there is lots of work to be done here.
Really, this screen should have the SSID of the hotspot, but we need to use
a private API to get that. Coming soon...
The icon is free software from:
https://commons.wikimedia.org/wiki/File:Wifi.svg
There was some confusion about the "SD Card" portion of the string.
Sometimes it will not store on the SD card, e.g. if the SD card is
not mounted, or inaccessible to F-Droid.
Use custom code rather than "Locale.forLanguageTag" (which is android-21
specific). Also fixed the actual setting of the language, by modifying
the code in FDroidApp to respect the country code (rather than just the
language code).
Android's lint will give warnings for all strings that are not translatable
or translated. Some strings like repo name/description and language codes
should never be translated. Here's how to officially mark as "do not
translate":
* for individual strings, include: translatable="false"
* for the entire file, name it: donottranslate.xml
http://tools.android.com/recent/non-translatablestringshttps://code.google.com/p/android/issues/detail?id=75163
Also changed the way locales are loaded. Now it deals well with language
codes that are followed by country codes (e.g. "en-US" rather than just
"en").
Change client language from the app options (#155)
Bug: ActionBar Language does not change.
Edit: To make it more clear, you have to restart the app manually for the action bar language to be changed.
See merge request !65
It does this by sending a HTTP POST request to /request-swap on the
swap server. That listens for a POST to this path, and responds by
popping open a confirmation message to the user on the server device.
