we shall see

.github/workflows/main.yml

@@ -24,9 +24,12 @@ jobs:
           sudo apt update -qq
           sudo apt install -yqq libguestfs-tools qemu-utils qemu-system-arm qemu-efi-aarch64 qemu-block-extra qemu-user-static binfmt-support rsync sudo wget xz-utils pigz mount dosfstools libarchive-tools
           
+      - name: Make build script executable
+        run: chmod +x build.sh
+
       - name: Build firmware
         run: |
-          sudo ./build_raspberry_pi.sh
+          sudo ./build.sh
 
       - name: Release build artifacts
         uses: softprops/action-gh-release@v1
@@ -34,6 +37,6 @@ jobs:
           append_body: true
           body_path: ./version-info
           files: |
-            ./anotterkiosk-*
+            ./n-anotterkiosk-*
         env:
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}

README.md

@@ -21,7 +21,6 @@ This project aims to solve a lot of those (at least for the author), it might al
 - [Images built via CI](https://github.com/Manawyrm/AnotterKiosk/blob/main/.github/workflows/main.yml)
 - WiFi connection support
 - Raspberry Pi (Arm64) compatibility
-- PC (x86) compatibility
 - [USB flash drive, USB SSD, etc. compatible](#how-to-use)
 - aarch64 mode for Raspberry Pis (_significant_ performance improvements over armv7/32bit ARM)
 - Read-only filesystem handling (no more broken SD cards)

build.sh

@@ -42,17 +42,16 @@ sudo losetup -P /dev/loop0 raspikiosk.img
 sudo mount /dev/loop0p2 "${BUILD_DIR}"
 sudo mount /dev/loop0p1 "${BUILD_DIR}/boot"
 
-# Copy the (raspberry pi-specific) skeleton files
-sudo rsync -a "${SCRIPT_DIR}/raspberry_pi_skeleton/." "${BUILD_DIR}"
-sudo rsync -a "${SCRIPT_DIR}/kiosk_skeleton/." "${BUILD_DIR}/kiosk_skeleton"
+# Copy the skeleton files
+sudo rsync -a "${SCRIPT_DIR}/kiosk_skeleton/." "${BUILD_DIR}"
 
 # Make fstab read-only
 sed -i 's/vfat    defaults/vfat    ro,defaults/g' "${BUILD_DIR}/etc/fstab"
 sed -i 's/ext4    defaults/ext4    ro,defaults/g' "${BUILD_DIR}/etc/fstab"
 
 # Include git repo version info
-echo -n "AnotterKiosk Raspberry Pi version: " > "${BUILD_DIR}/version-info"
-git describe --abbrev=4 --dirty --always --tags >> "${BUILD_DIR}/version-info"
+echo -n "N-AnotterKiosk Raspberry Pi version: " > "${BUILD_DIR}/version-info"
+git describe --abbrev=4 --always --tags >> "${BUILD_DIR}/version-info"
 
 # Mount system partitions (from the build host)
 sudo mount proc -t proc -o nosuid,noexec,nodev "${BUILD_DIR}/proc/"
@@ -63,9 +62,10 @@ sudo mount devpts -t devtmpfs -o mode=0755,nosuid "${BUILD_DIR}/dev/"
 sudo chroot "${BUILD_DIR}" /raspberry_pi_bullseye.sh
 
 # and then actually install everything.
-sudo chroot "${BUILD_DIR}" /kiosk_skeleton/build.sh
+sudo chroot "${BUILD_DIR}" /build.sh
 
-sudo rm -r "${BUILD_DIR}/kiosk_skeleton"
+# remove the build scripts
+sudo rm "${BUILD_DIR}/build.sh"
 sudo rm "${BUILD_DIR}/raspberry_pi_bullseye.sh"
 
 cp "${BUILD_DIR}/version-info" version-info
@@ -83,6 +83,6 @@ sudo umount "${BUILD_DIR}"
 
 sudo losetup -D /dev/loop0
 
-tag=$(git describe --abbrev=4 --dirty --always --tags)
-mv raspikiosk.img anotterkiosk-${tag}-arm64-raspberrypi.img
-pigz -4 anotterkiosk-${tag}-arm64-raspberrypi.img
+tag=$(git describe --abbrev=4 --always --tags)
+mv raspikiosk.img n-anotterkiosk-${tag}-arm64-raspberrypi.img
+pigz -4 n-anotterkiosk-${tag}-arm64-raspberrypi.img

build_x86.sh

@@ -1,90 +0,0 @@
-#!/bin/bash
-
-# *sigh*, some docker containers don't seem to have sbin in their PATH
-export PATH=$PATH:/usr/sbin
-
-SCRIPT_DIR="$(dirname "$(realpath "$0")")"
-BUILD_DIR="${SCRIPT_DIR}/work/root/"
-
-# cleanup any previous build attempts
-umount -fl "${BUILD_DIR}" || true
-rm -rf "${BUILD_DIR}" || true
-mkdir -p "${BUILD_DIR}"
-rm x86kiosk.img || true
-
-truncate -s 10G x86kiosk.img
-
-PARTLAYOUT=$(cat <<-END
-label: gpt
-label-id: 3BC7D7CD-4BF8-4E92-AAEB-2ACD5F8D05AA
-device: x86kiosk.img
-unit: sectors
-first-lba: 34
-last-lba: 20971486
-sector-size: 512
-
-x86kiosk.img1 : start=        2048, size=     2095105, type=EBD0A0A2-B9E5-4433-87C0-68B6B72699C7, uuid=9C99F1BB-11A8-4BB5-82C2-555D7A38F85C, name="EFI system partition"
-x86kiosk.img2 : start=     2099200, size=    18870272, type=0FC63DAF-8483-4772-8E79-3D69D8477DE4, uuid=93A9AB2C-BC29-4C6C-B6DD-1B4EDDED9A1E, name="Linux filesystem"
-END
-)
-echo "${PARTLAYOUT}" | sfdisk x86kiosk.img
-
-# Setup loop device for x86 image (with partition scanning)
-ld=$(sudo losetup -P --show -f x86kiosk.img)
-
-# Create filesystems
-sudo mkfs.ext4 "${ld}p2"
-sudo mkfs.fat -F 32 "${ld}p1"
-
-# Mount partitions
-sudo mount "${ld}p2" "${BUILD_DIR}"
-sudo mkdir "${BUILD_DIR}/boot"
-sudo mount "${ld}p1" "${BUILD_DIR}/boot"
-
-# Debootstrap debian
-sudo debootstrap --include=linux-image-amd64,grub-efi,sudo --arch amd64 bookworm "${BUILD_DIR}" http://deb.debian.org/debian/
-
-# Copy the skeleton files
-sudo rsync -a "${SCRIPT_DIR}/x86_skeleton/." "${BUILD_DIR}"
-sudo rsync -a "${SCRIPT_DIR}/kiosk_skeleton/." "${BUILD_DIR}/kiosk_skeleton"
-
-# Create fstab
-fat_uuid=$(lsblk -no UUID "${ld}p1")
-ext_uuid=$(lsblk -no UUID "${ld}p2")
-
-echo "UUID=${fat_uuid}  /boot           vfat    ro,defaults          0       2" | sudo tee "${BUILD_DIR}/etc/fstab"
-echo "UUID=${ext_uuid}  /               ext4    ro,defaults,noatime  0       1" | sudo tee -a "${BUILD_DIR}/etc/fstab"
-
-# Include git repo version info
-echo -n "AnotterKiosk x86 version: " > "${BUILD_DIR}/version-info"
-git describe --abbrev=4 --dirty --always --tags >> "${BUILD_DIR}/version-info"
-
-# Mount system partitions (from the build host)
-sudo mount proc -t proc -o nosuid,noexec,nodev "${BUILD_DIR}/proc/"
-sudo mount sys -t sysfs -o nosuid,noexec,nodev,ro "${BUILD_DIR}/sys/"
-sudo mount devpts -t devtmpfs -o mode=0755,nosuid "${BUILD_DIR}/dev/"
-
-# and then actually install everything.
-sudo chroot "${BUILD_DIR}" /setup.sh
-sudo chroot "${BUILD_DIR}" /kiosk_skeleton/build.sh
-
-sudo rm -r "${BUILD_DIR}/kiosk_skeleton"
-
-cp "${BUILD_DIR}/version-info" version-info
-
-sudo umount -fl "${BUILD_DIR}/proc"
-sudo umount -fl "${BUILD_DIR}/sys"
-sudo umount -fl "${BUILD_DIR}/dev"
-
-sudo umount "${BUILD_DIR}/proc"
-sudo umount "${BUILD_DIR}/sys"
-sudo umount "${BUILD_DIR}/dev"
-
-sudo umount "${BUILD_DIR}/boot"
-sudo umount "${BUILD_DIR}"
-
-sudo losetup -D "${ld}"
-
-tag=$(git describe --abbrev=4 --dirty --always --tags)
-mv x86kiosk.img anotterkiosk-${tag}-x86.img
-pigz -4 anotterkiosk-${tag}-x86.img

kiosk_skeleton/boot/config.txt

@@ -61,3 +61,4 @@ arm_boost=1
 
 [all]
 avoid_warnings=1
+dtparam=spi=on

kiosk_skeleton/boot/kioskbrowser.ini

@@ -15,7 +15,7 @@ reboot_time = 04:00
 ; set screen rotation to be used (normal, left, right, inverted)
 ;rotate_screen = "normal"
 ; configure screen to power on/off as specific time of day (time format in 24 hours)
-;screen_off_time=23:00
+screen_off_time=22:30
 ;screen_on_time=07:00
 ; configure chrome to refresh the page every x minutes
 ;refresh_screen_every_x_min=15

kiosk_skeleton/etc/hyperion/hyperion.config.json

@@ -0,0 +1,20 @@
+{
+	"device" :
+	{
+		"name"       : "MyPi",
+		"type"       : "ws281x",
+		"leds"       : 50,
+		"colorOrder" : "grb",
+		"gpio"       : 18,
+		"freq"       : 800000,
+		"dmanum"     : 5
+	},
+
+	"grabber-framebuffer" :
+	{
+		"width" : 64,
+		"height" : 64,
+		"frequency_Hz" : 10.0,
+		"priority" : 890
+	}
+}

kiosk_skeleton/etc/systemd/system/hyperion.service

@@ -0,0 +1,16 @@
+[Unit]
+Description=Hyperion ambient light systemd service
+After=network.target
+
+[Service]
+ExecStart=/usr/bin/hyperiond
+WorkingDirectory=/usr/share/hyperion/bin
+User=root
+Group=root
+TimeoutStopSec=5
+KillMode=mixed
+Restart=on-failure
+RestartSec=2
+
+[Install]
+WantedBy=multi-user.target

kiosk_skeleton/etc/systemd/system/kiosk-schedule-screen.service

@@ -1,4 +1,4 @@
-# /etc/systemd/system/kiosk-sechedule-screen.service
+# /etc/systemd/system/kiosk-schedule-screen.service
 [Unit]
 Description=Schedule Screen On/Off Timers
 After=multi-user.target

kiosk_skeleton/home/pi/.config/openbox/autostart

@@ -44,7 +44,7 @@ fi
 
 # start chromium
 URL=$(get-ini /boot/kioskbrowser.ini browser url)
-chromium --start-fullscreen \
+chromium-browser --start-fullscreen \
 		 --allow-insecure-localhost \
 		 --autoplay-policy=no-user-gesture-required \
 		 --check-for-update-interval=1 \

kiosk_skeleton/home/pi/.xsession

@@ -0,0 +1,2 @@
+#!/bin/bash
+exec openbox-session

kiosk_skeleton/raspberry_pi_bullseye.sh

@@ -12,3 +12,10 @@ APT_LISTCHANGES_FRONTEND=none DEBIAN_FRONTEND=noninteractive apt -o Dpkg::Option
 # be less tested as the currently shipping kernel in the Raspberry Pi images.
 apt install -y rpi-update
 SKIP_CHECK_PARTITION=1 SKIP_WARNING=1 rpi-update
+
+# Install Hyperion.ng
+wget -qO- https://apt.hyperion-project.org/hyperion.pub | gpg --dearmor -o /usr/share/keyrings/hyperion.pub
+echo "deb [signed-by=/usr/share/keyrings/hyperion.pub] https://apt.hyperion-project.org/ bookworm main" > /etc/apt/sources.list.d/hyperion.list
+apt update
+apt install -y hyperion
+systemctl enable hyperion.service

kiosk_skeleton/usr/bin/kiosk-autossh

@@ -6,8 +6,7 @@ then
 	if [ -f "/boot/id_rsa" ]; then
 		cp /boot/id_rsa /root/.ssh/id_rsa
 		AUTOSSH_KEYPATH="-i /root/.ssh/id_rsa"
-	fi
-	if [ -f "/boot/id_ed25519" ]; then
+	elif [ -f "/boot/id_ed25519" ]; then
 		cp /boot/id_ed25519 /root/.ssh/id_ed25519
 		AUTOSSH_KEYPATH="-i /root/.ssh/id_ed25519"
 	fi

kiosk_skeleton/usr/bin/schedule-screen-timers

@@ -16,14 +16,7 @@ remount_root() {
 
 
 get_ini_value() {
-    local section=$1 key=$2
-    awk -F '=' -v sec="$section" -v k="$key" '
-    $0 ~ /^\[.*\]/ { in_section = ($0 == "[" sec "]") }
-    in_section && $1 ~ "^"k"$" {
-        gsub(/^[ \t]+|[ \t]+$/, "", $2)
-        print $2
-        exit
-    }' "$INI_FILE"
+    get-ini "$INI_FILE" "$1" "$2"
 }
 
 create_recurring_timer() {

kiosk_skeleton/usr/bin/setup-refresh-timer

@@ -1,9 +1,7 @@
 #!/bin/bash
 
 INI_FILE="/boot/kioskbrowser.ini"
-REFRESH_INTERVAL=$(awk -F '=' '/^\[screen\]/ { in_screen=1; next }
-                                in_screen && /^\[/ { in_screen=0 }
-                                in_screen && $1 ~ /refresh_screen_every_x_min/ { gsub(/ /, "", $2); print $2 }' "$INI_FILE")
+REFRESH_INTERVAL=$(get-ini "$INI_FILE" screen refresh_screen_every_x_min)
 
 # Function to safely remount root FS
 remount_root() {

x86_skeleton/etc/apt/sources.list

@@ -1,10 +0,0 @@
-deb http://deb.debian.org/debian bookworm main
-deb-src http://deb.debian.org/debian bookworm main
-
-deb http://deb.debian.org/debian-security/ bookworm-security main
-deb-src http://deb.debian.org/debian-security/ bookworm-security main
-
-deb http://deb.debian.org/debian bookworm-updates main
-deb-src http://deb.debian.org/debian bookworm-updates main
-
-deb http://deb.debian.org/debian bookworm-backports main

x86_skeleton/etc/default/grub.d/anotterkiosk.cfg

@@ -1 +0,0 @@
-GRUB_DISTRIBUTOR="AnotterKiosk"

x86_skeleton/setup.sh

@@ -1,26 +0,0 @@
-#!/bin/bash
-
-apt update
-# make sure we have all updates installed (from the -updates and -security repos)
-APT_LISTCHANGES_FRONTEND=none DEBIAN_FRONTEND=noninteractive apt -o Dpkg::Options::="--force-confold" -f -y dist-upgrade
-APT_LISTCHANGES_FRONTEND=none DEBIAN_FRONTEND=noninteractive apt install -f -y -t bookworm-backports linux-image-amd64
-# to remove old kernel versions
-apt --purge autoremove
-apt install -y polkitd locales zstd dhcpcd wpasupplicant xserver-xorg-video-nouveau
-locale-gen en_US.UTF-8
-
-apt install -y firmware-amd-graphics firmware-iwlwifi firmware-brcm80211 firmware-atheros firmware-misc-nonfree firmware-realtek firmware-ath9k-htc
-
-echo "grub-efi-amd64 grub2/force_efi_extra_removable boolean true" | debconf-set-selections
-update-grub
-grub-install --target=x86_64-efi --efi-directory=/boot --removable --bootloader-id=AnotterKiosk 
-
-useradd -U -m -s /bin/bash -u 1000 -G audio,video,users,input,adm,dialout,plugdev,render pi
-
-systemctl enable dhcpcd
-
-rm /etc/resolv.conf
-echo "nameserver 8.8.8.8" > /etc/resolv.conf
-echo "nameserver 2001:4860:4860::8888" >> /etc/resolv.conf
-echo "nameserver 8.8.4.4" >> /etc/resolv.conf
-echo "nameserver 2001:4860:4860::8844" >> /etc/resolv.conf